Yes, in order to use our patches and transfers we highly recommended that you use a commercial grade heat press. Unfortunately, the Cricut Easy Press isn't designed to apply the exact same pressure evenly over the transfer in the way that commercial grade heat presses do. Please know that if you choose to use the Cricut Easy Press (or similar) you do run the risk of not having a quality finished product.

A home iron WILL NOT work!!!

Yes! These can go on any fabric including 100% cotton, polyester and mixes.

Caring for your heat transfer decorated garment is simple and if applied and cared for properly. We recommend waiting at least 24 hours after pressing a garment to perform a wash / dry cycle.

• Washing the garment inside out is the best way to prevent premature wear and tear.
• Cold wash only and hang to dry or tumble dry inside out.

Iron On Patch Washing Instructions

Iron on patches are permanent, we recommend you do not use laundry softener when washing.

• 325 degrees for 7 seconds
• HEAVY EVEN PRESSURE
• No teflon sheets, butcher paper, or any covers
• Hot Peel, immediately peel the transfers when heat is removed

• Set heat press to 330-350 degrees on heavy pressure.
• Lay patch on garment, cover with a teflon/butcher paper and press for 20 seconds.
• Turn garment inside out and press for 35 seconds WITH NO COVERS.

Iron On Patch Washing Instructions

Iron on patches are permanent, we recommend you do not use laundry softener when washing.